Real Time PCR - Thermocyclers
Real-time PCR detection system consists of a thermocycler equipped with an optical detection module to measure the fluorescence signal generated during each amplification cycle as the fluorophore binds to the target sequence. Numerous applications in scientific investigations and clinical diagnoses. Models with great detection capacity and dynamic range, notably differentiating in the number of optical channels (number of filters).
Real-time PCR detection system consists of a thermocycler equipped with an optical detection module to measure the fluorescence signal generated during each amplification cycle as the fluorophore binds to the target sequence. Numerous applications in scientific investigations and clinical diagnoses. Models with great detection capacity and dynamic range, notably differentiating in the number of optical channels (number of filters).
REAL-TIME PCR SYSTEM 96 TUBES
Equipment with no calibration required, with modular design with multiple functions: automatic dehumidification, independent temperature control, sample storage at low temperature (4ºC), quantitative fluorescence analysis. Excellent performance and low energy consumption. Thermostat via Peltier ( Ferrotec system) with automatic thermostated lid , without oil. Internal microprocessor control via color touch screen. Software that allows to configure protocols in an easy and intuitive way and complete analysis of the results, including among others absolute and relative quantification. Several models are available that differ in the number of optical reading channels: 4, 5 or 6 optical channels.
Specifications:
- Block with capacity for 96 0.2 mL PCR tubes , 12 strips of 8 PCR tubes or 96-well PCR plates;
- Sample volume from 10 to 100 µl;
- Temperature range from 4 ° C to 105°C, with increments of 0.1°C;
- Temperature of the thermostated lid : 30°C – 110°C;
- Temperature uniformity of ≤ ± 0.2 °C;
- Excitation wavelength: 300 - 800 nm;
- Emission wavelength: 500 - 800 nm;
- Multichromatic measurements with 6 optical channels:
-- Channel 1: FAM, SYBR Green
-- Channel 2: HEX, VIC, TET, JOE, Cy3, NED, TAMRA
-- Channel 3: ROX, Texas-Red
-- Channel 4: Cy5
-- Channel 5: Cy5.5
-- Channel 6: User configurable;
- Dynamic Range: 1-10^10 Copies/L;
- Dimensions ( WxLxH ): 38 x 40 x 38 cm.
REAL-TIME PCR SYSTEM 96 TUBES OR 48 TUBES
PCR system, with high detection capability and dynamic range, and a long-lasting LED excitation source, without maintenance or preheating. Better temperature control and uniformity are achieved with a constant current supply system and a multi-point temperature control module. Lower readout optics reduce interference between excitation and emission light and between samples, which greatly improves the “signal-to-background noise” ratio. Thermostat via Peltier ( Ferrotec system) with automatic thermostatized lid , without oil and with adjustable height. Control and data analysis when connected to a PC or tablet through software that allows you to configure protocols in a simple and intuitive way and automatically carry out a complete analysis of the results. Support temperature sensor short circuit, open circuit and over temperature protection and alarm. Various models are available which differ in particular in the number of optical reading channels: 2, 4 or 5 optical channels.
Specifications:
- Block with capacity for 96 0.2 mL PCR tubes , 12 strips of 8 PCR tubes or 96-well PCR plates (similar model available with capacity for 48 tubes of 0.2 mL , 6 strips from 8 PCR tubes);
- Sample volume from 5 to 100 µl;
- Temperature range from 4 ° C to 105°C, with increments of 0.1°C;
- Temperature of the thermostated lid : 30°C – 110°C;
- Temperature uniformity of ≤ ± 0.3 °C;
- Excitation wavelength: 300 - 800 nm;
- Emission wavelength: 500 - 800 nm;
- Multichromatic measurements with 5 optical channels:
-- Channel 1: FAM, SYBR Green
-- Channel 2: HEX, VIC, TET, JOE, Cy3, NED, TAMRA
-- Channel 3: ROX, Texas-Red
-- Channel 4: Cy5
-- Channel 5: Cy5.5
-- Channel 6: User configurable;
- Dynamic Range: 1-10^10 Copies/L;
- Dimensions ( WxLxH ): 38.6 x 41 x 35.2 cm.
REAL-TIME PCR SYSTEM 16 TUBES
Compact, high-sensitivity real-time PCR system with high detection capability and dynamic range. Long-lasting, maintenance-free and preheating LED excitation source. Thermostat via Peltier ( Ferrotec system) with automatic thermostatized lid , without oil and with adjustable height. Control and data analysis when connected to a PC or tablet through software that allows you to configure protocols in a simple and intuitive way and automatically carry out a complete analysis of the results. Support temperature sensor short circuit, open circuit and over temperature protection and alarm. Various models are available which differ in particular in the number of optical reading channels: 2 or 4 optical channels.
Specifications:
- Block with capacity for 16 PCR tubes of 0.2 mL, 8 strips of 8 PCR tubes;
- Sample volume from 5 to 100 µl;
- Temperature range from 0 ° C to 100°C, with increments of 0.1°C;
- Temperature of the thermostated lid : 30°C – 110°C;
- Temperature uniformity of ≤ ± 0.25 °C;
- Emission wavelength: 450- 750 nm;
- Multichromatic measurements with 4 optical channels:
-- Channel 1: FAM, SYBR Green
-- Channel 2: HEX, VIC, TET, JOE, Cy3, NED, TAMRA
-- Channel 3: ROX, Texas-Red
-- Channel 4: Cy5
- Dynamic Range: 1-10^10 Copies/L;
- Dimensions ( WxLxH ): 18 x 24 x 16 cm.
